Sounds geat Steve. I made a pass on these plugs and my bottle was empty my mistake put a fresh bottle in towed to the lanes made this hit and pulled...

I don't see adding piston speed as being a bad thing. That said, you may be able to get a better idea if you are right about the head having too much...

Everett, Based on the fact that you had a 33N/23F at 5 PSI and 11 degrees of timing and I had you go to a 28N/22F at 5 PSI and 23 degrees of timing...

Steve here they are with the changes

Thanks Steve, as always.

Here are a couple quick shots of a Reher Morrison 855 Pro Mod intake we just finished up.. Quite a few custom touches to this manifold for the...

We have a manifold here at our shop for a total overhaul of 4 systems that was originally built by someone else. While going through it we noticed...

I have very few customers that use the Torco fuel these days. Based on that we have a somewhat limited knowledge of what they offer these days.. SJ

I would have to say that these heads are no more of less timing sensitive then most any other SBF. Compression, cam, plug, and fuel will also play a...

To be more specific, my question is does the use of oxygenated fuel affect a nitrous tune up? I see some fuel suppliers advertising fuel formulated...

There can be several options as for fuel. The compression of the engine and cam profile can be a part of it ?? There's a VP fuel called Q-16 that is...

Best to call anytime. If I do not catch call just leave a name and number and I'll get back ASAP.. Thanks, SJ

WOW !!! AWESOME post Unc.. We appreciate the post as well as you guys giving I-S a chance to be a part of your program.. Thanks and best of luck this...

Welcome a board.. SJ

Steve these are my plugs Pulled to the line 8th mile shut off pulled back sprayed with brakeclean Ok heres the tune up 33 nitrous 23 fuel 5lbs...

Welcome to IS.

Hey guys, just thought I'd hit the newb thread. I have a 01 Camaro street/strip car. This is my first time messing with nitrous so I probably won't...

Ok when is a good time to reach you

Looking at the job number that is a two stage plate we built way back in 2008. There are some updated jetting for those systems now as well as it may...

NLM, Yes, I would put the plate under the S.S. and on top of the manifold for best results.. Thanks, SJ