These are the same parts we start with in building and plumbing many of our race winning and record setting customers nitrous systems!! This Induction Solutions nitrous plumb kit is adjustable from 100 to 500+ HP. These nitrous plumb kits are built with the best components in the business. Stainless Steel nozzles, Stainless Steel tubing, and Stainless Steel jets for 150, 200, and 250 HP. Our solenoids have the “low amp” coils that have become so hard to find in the industry, as well as, PTFE plungers in our nitrous solenoids.
You can choose from either our own 90 degree (Soft Plume) nozzle or our own compact Annular nozzles. Both in S.S.
You can choose if you want to supply your kit with the -6 “Y” and -6 nitrous lines to the solenoids or you may order a -4 kit, which will come with -4 filtered fittings and a -4 x -6 “Y” for a little more room to work around things.
These kits come with all filtered inlet fittings for the nitrous and fuel solenoids as well.
These kits are for the do it yourself guys and professional installers and engine builders who know what tunes they like to use and are very familiar with direct port systems tuning. Many buying these kits also send back to I-S after they have installed for I-S to blueprint and flow the system. This service is an additional $595.00 and will get you current I-S tune ups, 4 jet settings and the jets, as well as near 24/7 tech help to after we have your specs in our system.
You can add our Trash Can Solenoids for an additional $100 or our SuperMax .125 Solenoids for an additional $50 as an upgrade.
Some items may be slightly different in color than what shows in the picture.
If you have an Induction Solutions flowed system please call Steve for help with your timing, if not please utilize this general timing sheet as a guideline