I-S Real Street System Complete Kit – Nitrous Plate System
If you are looking for the best two bar (1 nitrous/1 fuel) nitrous plate system in the business, this is IT!!
First of all, everything starts with the Edelbrock Performer RPM II plate. Steve helped design the Edelbrock plate we use for our Real Street plate systems while employed by Edelbrock. What makes the I-S Real Street nitrous plate system different from an out of the box kit is the way we blueprint, modify, flow and re-jet map the system as well as the great tech support we provide too.
The plate is ½” thick with stainless steel spray bars. One of the things that make this plate unique as well is that there are two nitrous discharge points for every one fuel. This equals better flow, atomization as well as distribution and horsepower.
Our “Cheater Style” fuel solenoid with a filtered inlet fitting feeds the fuel side. The nitrous bar is fed by our own Bottom Exit .120 nitrous solenoid for free-flowing characteristics. Our nitrous solenoid has a PTFE plunger, a low amp coil (8-10 AMPS), as well as, a filtered inlet fitting.
I-S Real Street systems are all flowed and come with custom jet mapping from 100-375+ HP. This kit includes all S.S jets for each power level.
Includes: plate, lines, filtered inlet fittings, solenoids with brackets to mount, I-S blue print, flowed, jet mapping and jets.
Complete Kit Includes
* 10LB bottle, mounting brackets, bottle nut (-6), -6 supply line
* I-S blueprinted plate, lines, solenoids, solenoid bracket, inline filtered fittings
* Electrical hardware including WOT switch, arming switch, power relay and connectors
Extras included in Complete Kit
A couple of extras we have included in this kit to make it a true complete kit are a -6 purge kit, racer safety as well as a 1 ½” liquid filled nitrous pressure gauge on the bottle.
If you have an Induction Solutions flowed nitrous plate system please call Steve for help with your timing. If not, please utilize this general timing sheet as a guideline.