Dry 6 Cylinder Plumb Kit

Description

Our Dry 6 Cylinder Plumb Kit is the best on the market, our kits are the closest thing to a true complete kit. Our standard plumb kit includes everything to completely plumb the manifold and hook a nitrous feed line up to. These kits are perfect for six cylinder cars! The parts included are:

• 6 Stainless Steel Dry 90° Nozzles
• 6 12″ Stainless Steel Hard Lines
• Filtered Nitrous Inlet Fitting
• .120 Bottom Exit Nitrous Solenoid with Low Amp Draw Coil
• 1 Billet Distribution Block
• All the necessary hardware to plumb the manifold
• Stainless Steel Jets for 50, 75, and 100 hp (not shown in picture)

Our complete kit adds onto the parts list of the plumb kit and makes it a perfect kit for someone completely new to nitrous! The complete kit adds:

• A 10lb Nitrous Bottle including -6 Bottle Nut, Racer Safety, and Pressure Gauge (no options for smaller motorcycle bottles at this point in time)
• Bottle Brackets
• 14′ Nitrous Feed Line (customizable upon request)
• Purge Kit
• Wiring Harness including Arming Switch, Relay, Inline Fuse, and various electrical connections
• Microswitch and a Universal Microswitch Bracket

These kits both require the nitrous fuel enrichment to be controlled by the ECU.

If you do not already have a tubing bender we highly recommend purchasing one to keep the lines from collapsing and restricting flow when bending them. We sell the same tubing benders we use in house to plumb every manifold we do right here -> Tubing Bender